Tuesday, September 23, 2014

Troublesome Tombstone Tamed: Determining the Death Date of 5th Great Grandpa John Dunham

The row with the tombstones for John Dunham's family.
Old tombstones have their positive and negative sides. (And I don’t mean their fronts and backs.) On the positive side – they exist! On the negative side – they can be very worn with age from the elements (or accidents or vandals) which can make reading them difficult and photographing them challenging. With the internet and various gravesite/tombstone-focused websites, today it is quite likely you do not have to leave your couch/chair to see a desired tombstone.

But sometimes you just have to visit the darn thing in person if you really want learn the answer you seek.

Just such a case was the tombstone of my 5th Great Grandfather John Dunham. He is buried in the Quaker Cemetery in the town of Orchard Park (formerly East Hamburgh), Erie County, New York. The problem with his tombstone is that the death year is hard to read and has been that way for a long time.

I first came across a tombstone reading of his resting place in October 2000 on a website for Erie County, New York, Cemeteries.(1) The researcher who did the reading was quite honest rather than arbitrarily picking a death year. It could be one of three years: 1846, 1812 or 1816.

Frustrating? Yes. Not knowing which death year was correct makes a big difference in this case because his tombstone is one that gives the age at death rather than a specific birth date. Change the death year and it changes the birth year and … who you might be dealing with.

During an email exchange in 2001, another researcher gave another reading of the tombstone with a death year of 1816.(2) Though, to be honest, we don’t know if it was her personal reading of the tombstone or another person’s reading because we didn't think to ask at the time.

Find-A-Grave Memorial Page
In December of 2009, a Find-A-Grave memorial page was created for John Dunham’s tombstone.(3, 3revised) Again, the entry gave the death year as 1816. Though I'm not positive, I think this was the page creator's reading since this person added a photograph of the tombstone also. Due to the photo being lower resolution and small in size, it could provide no solution to the death year problem regardless of who was looking at the photo.

But after studying this photo for some time, I was able to note a few things. Besides being worn in the location of the death year, the exaggerated thick/thin of the serif font used for the carving contributes to making this tombstone hard to read. I also could not help to think that a stone carver skilled enough to hand-carve the name in such a tight arc would not likely leave a large gap between the 8 and 6 if the number was a 1. But the space would be of an appropriate size if the number was a worn 4.



 Chart of Various Readings of John Dunham's Tombstone

Date of Reading
2000 Oct 17 (or earlier)
2001 Jan 29
2009 Dec 16
2009 Dec 16
Source/Reader
Partial Cemetery Reading by Leo J Katharine M. Koop with additional names by Mrs. Kritzer posted on Erie County, NY, Cemeteries website (1)
by Sue Kulp (researcher) in her email correspondence (no indication if this was her personal reading or another’s) (2)
Find A Grave Memorial Page Entry created by Mary Kester Rude (3)
Find A Grave Memorial Page photograph by Mary Kester Rude [note: my reading of this photograph at the time found]
Name
John Dunham
John Dunham
John Dunham
John Dunham
Date of Death
23 Jan 1846 or 12 or 1816
1/23/1816
22 Jan 1816
23d 1st mo. 1846 or 1816
Age at Death
91 yrs 2 mo 9 da
lot #31
91-2-9
Not filled in
91 y’rs 2 mo 9 d’s
 

Now at the time I spotted the tombstone reading in 2000 I really was not sure if this John Dunham was my direct ancestor. He was one of two suspects but he was the one my gut said was the correct one. So as you do research looking for proof, you collect things and hang on to them … just in case. And you look at alternate records for the answers you seek.

In this John Dunham’s case:
  • the Quaker meeting records yielded no answer what so ever to his death year; 
  • there is no civil death record because New York did not start keeping civil records until much later; 
  • a search of probate records resulted in no records found for him; 
  • a search of land records resulted in no records found for him; 
  • a search of census showed no entry for him as head of his own household and no corresponding tick mark in the right age bracket in his son’s household except for the year 1840. 

So I suspected the year 1846 was the correct death year BUT it was at best circumstantial. At a standstill, I researched elsewhere and on other parts of my family tree.

A few years ago as hard-to-access, original records started to be digitized, I was finally able to put some of the “stubborn” family pieces together. Though my evidence is still circumstantial in my link between the fourth and fifth generation, it is a well-researched and analyzed conclusion that as of this August includes some DNA evidence.

My research again lead me back to John Dunham buried in the Quaker Cemetery and the unanswered question of the death year carved into that tombstone.

What was I to do? Answer: Take a road trip to the grave to see it for myself and, hopefully, arrive at a decisive answer.

Since I knew the tombstone was hard to read, I came more prepared than I would for one of my typical cemetery visits. I decided that if I could not make a decisive reading either by simply reading/observing the carving in its natural state or by using plain water sprayed onto the carving, then if the tombstone was not flaking or deteriorating I would try two alternate methods: making an aluminum foil impression and/or a wax rubbing. (See my post on tombstone reading methods for more details, tips and do's and don'ts.)


An aluminum foil impression is done by placing a sheet of foil on the carved surface. Then a clean, soft, fluffy brush (like a makeup brush) is used to gently impress the carving onto the foil. Usually, this puts less stress on the surface of the tombstone than a traditional wax rubbing because far less pressure is needed to make the impression. The downside is that the foil rubbing is fragile and saving it for posterity can be difficult. But viewing/photographing the foil on the tombstone can greatly aid in reading the carvings. Viewing/photographing at different angles and even shining/bouncing light at different angles against the foil while taking pictures can further help you. (See my post on tombstone reading methods for more details, tips and do's and don't.)

A wax rubbing involves placing a sheet of paper, cloth or Pellon interfacing (not the iron-on version) over the carved surface. Once the material is secure, colored wax is gently rubbed over the material sitting on top of the carved surface to transfer the impression. Wax, be it a cake of tombstone wax or a child’s thick width crayon, is more durable than other materials sometimes mentioned. With this method you need to use a gentle touch and be sure not to leave wax marks on the stone. Testing on a non-tombstone surface is advised to ensure there is no bleed-through of the wax through the paper/material that can damage a tombstone. (See my post on tombstone reading methods for more details, tips and do's and don't.)


As it would turn out, John Dunham’s tombstone sits under a tree which is part of the reason why it does not photograph well no matter the time of day. But the stone itself is very worn in the area on the death year. A reading by simple observation and photographs of this scenario did not result in a decisive answer. Applying plain water using a clean spray bottle to the carved area and photographs of this scenario also did not yield a decisive answer.


Plain water sprayed on carving.
Natural, nothing done to stone.



So after studying the tombstone for any loose/flaking stone or other signs of a weak surface and finding none, I made an aluminum foil impression using lightweight foil and a clean, soft brush. The result? At first I wasn’t sure (was I seeing what I wanted?) but upon reviewing the photographs I saw the answer: 1846.


An Aluminum Foil Impression makes the carving readable.

Additional tweaking of the image in PhotoShop further confirmed this.

Posterization added to photo.
Extra Contrast added to photo.
Since the stone surface was not weak or in danger, I proceeded to make a tombstone rubbing using Pellon interfacing and wax. This also brought the answer to the surface: 1846.

Pellon Interfacing and wax rubbing.
So now I have my answer, the tombstone reads:

John Dunham
DIED
23 d. 1st mo. 1846
AE. 91y’rs. 2 mo.
& 9 d’s.

And, that would make his birth date: 14 November 1754

Thanks Mary at Find-A-Grave for transferring John Dunham's memorial page to me. I have now updated his page.

Now, it would not be a road trip without something humorous happening or possibly happening to us.

We made several aluminum foil impressions at various cemeteries during this trip. Rather than throw them out, I stacked them in the trunk on top of the luggage. While at the international border waiting in line, I expressed to my passengers a concern that had just popped up in my head: If we get searched, we may have some explaining to do about the "odd" tin-foil pile in the trunk. "Well, you see officer, we're genealogists ..." Thankfully, no explanation was necessary at any of our crossings.

And remember that odd box from my second post? That box never made it to recycling. So now the "tombstone box" is holding the stack of tombstone foil impressions brought home from this trip. (I wonder if I "misplace" the box with some of the tin foil impressions in the attic if some future homeowner might discover it and an interest in family history?)

Finally, no this post does not answer my August 6th post, I've Gone Researching ... More to Follow. Though this cemetery visit is from the same trip, that answer to August 6th will be coming soon.


Note: Since some cemeteries and localities have banned tombstone rubbings to protect fragile tombstones, remember to check with each cemetery to make sure rubbings are permitted.


©2014, goneresearching. All text and photos in this post are copyrighted & owned by me (goneresearching) unless indicated otherwise. No republication (commercial or non-commercial) without prior permission. You may share (tell others) of this blog as long as you give credit and link to this site (not by downloading or copying any post). Thank you.
____________________
Sources
1 K., Kathy M., Erie County, New York Cemeteries Past and Present. (http://wnyroots.tripod.com/ : accessed 17 October 2000), “Quaker Cemetery Town of Orchard Park, Erie County, New York,” partial listing (date not stated) by Leo J. and Katharine M. Kopp with additional names listing by Mrs. Kritzer, Jewett-Holmwood Rd., Orchard Park, NY

2 Sue Kulp, New York ([email address] for private use), to (private), e-mail, 29 January 2001, “Re: John Dunham research,” Dunham Correspondence file, Dunham Research Files, Genealogy; privately held files by (private), ([email] and residence for private use.)

3 Find A Grave, Find A Grave, database and images, digital images (www.findagrave.com), memorial page for John Dunham (unknown - 1816), Find A Grave Memorial no. 45537622, citing Quaker Cemetery, Orchard Park, Erie County, New York; the entry created by Mary Kester Rude with photos submitted by Mary Kester Rude and Donna Casey. John Dunham DIED 23 d. 1 mo. 18?6 AE/ ?1 y'rs. 2 mo. & 9 d's. [note: tombstone photo is hard to read in areas, not sure of the years at death] Quaker Cemetery (Route 62, south of Eden Valley Bridge, on west side of road.).

3revised Find A Grave, Find A Grave, database and images, digital images (www.findagrave.com), memorial page for John Dunham (unknown - 1846), Find A Grave Memorial no. 45537622, citing Quaker Cemetery, Orchard Park, Erie County, New York; the entry maintained by goneresearching, originally created by Mary Kester Rude with photos submitted by Mary Kester Rude Donna Casey and goneresearching. John Dunham DIED 23 d 1st mo. 1846 AE. 91 y'rs. 2 mo. & 9 d's. Quaker Cemetery (Route 62, south of Eden Valley Bridge, on west side of road.)

Monday, September 22, 2014

I Can't Read Anything ... Oh, Now I Can

Please Note: I am not an expert and I do not claim to be one. What I present here is what I know and what I have experienced.

Nothing done to tombstone.
A while before planning our August road trip tombstone reading methods became a hot topic. What to do and what not to do. One alternative that was mentioned I had not heard of before. No one else from my local genealogy groups had heard of it either. Aluminum Foil Impressions.

So for our recent road trip, I brought along with me some lightweight aluminum foil and a clean, soft, fluffy makeup brush to give this method a try.

And you know what? It works, most of the time.
Nothing done to tombstone.

Cautions to Remember First

Of course, the best thing to do is as little as possible to a tombstone. Remember, DO NO HARM.

So if you have a troublesome tombstone, first try reading/taking a picture at different angles or at different times of day. (I know sometimes that one isn't possible.) You can also try bouncing light or shining light onto the carving while taking pictures.

If the "no touch" methods don't work, try plain water sprayed onto the carving. Plain water will do no damage. Take a photo just after wetting the stone and a while later when it is partially dried. Using just water often does the trick.

Plain water sprayed onto carving. Almost readable in this case.
Oh, if the stone is dirty use a lot of care and caution if you clean it. Do not scrub! Lightly, gently brush with a soft cloth or a soft (natural or poly) brush. Never use a metal brush or abrasive material. Never scrub hard. You can lightly brush off loose material but do not scrub live lichen off -- you may accidentally take a chunk of stone off with it.

Use just water and a light touch to remove splatters from birds, bugs, etc. Never use cleaning chemicals. Though it seems solid, stone is porous -- some more than others. Cleaning chemicals are more than likely to be acidic and will, if not immediately, eventually damage the stone. I know there are some commercial solutions that have been mentioned as okay for use with tombstones because they are pH neutral. But remember, you likely need to have the cemetery's permission to use these.

Old methods used in the past that you often hear about are: shaving cream, flour, cornstarch, powder, charcoal/chalk. BUT ALL OF THESE CAN DO DAMAGE AND SHOULD NOT BE USED. Shaving cream is acidic; flour/cornstarch contain starch that converts to sugar and feeds the lichen and "what nots" encouraging further growth; and charcoal/chalk does not clean off well and can stain the stone permanently.

So if doing nothing or plain water and/or light has not helped ... AND if the stone of the tombstone is not flaking or deteriorating then you can try an aluminum foil impression. Two caveats though. One, old tombstones made of slate are really, really fragile and it is best not to do any kind of impression/rubbing on them. Two, be aware some cemeteries and localities have banned tombstone rubbings to protect fragile tombstones. Do your research to keep yourself out of trouble.

So how is it done?

An aluminum foil impression is done by placing a sheet of foil on the carved surface. Since the foil can be bent around the surface, most often no tape, rubber bands or string is needed to secure it to the stone. (Have an extra pair of hands around in case the wind is not in your favor.) Then a clean, soft, fluffy brush (like a makeup brush) is used to gently impress the carving onto the foil. Usually, this puts less stress on the surface of the tombstone than a traditional wax rubbing because far less pressure is needed to make the impression. The downside is that a foil rubbing is fragile and saving it for posterity can be difficult. But viewing/photographing the foil on the tombstone at different angles and even shining/bouncing light at different angles against the foil while taking pictures can greatly aid in reading the carvings. So it is worth trying if the tombstone is not in danger and if you have the okay,

An Aluminum Foil Impression -- Now I can read it!
And without the caretaker's help we would never
have located this very small Quaker stone.
I don't know how many times we walked past it.
Thank you, Thank you.
Light and angles also aid reading.
This was a cloudy day with stone facing up.

As you can see from the photos sometimes the foil was not quite wide enough. In a couple cases, I did have to use more than one strip of foil on a tombstone. The wider-width aluminum foil is more often than not made of a heavier thickness foil and I have not yet tried it on a tombstone to see if it gives similar results.

Does it always work?

Unfortunately, there are tombstones that are too far gone and they still refuse to yield their stories. I had one where I only got a partial impression. At another cemetery, a very small tombstone's carving was completely erased by time. The aluminum foil impression did not even yield a single bump or divot in the stone.

So how does it compare to a traditional wax rubbing?

A wax rubbing involves placing a sheet of paper, cloth or Pellon interfacing (not the iron-on version) over the carved surface. Usually with this method the paper/material needs to be secured so it does not shift. Whatever method used should not damage the stone or leave residual matter that leads to damaging the stone. Sometimes just having another set of hands available to hold the material can solve the shifting problem.

Once the material is secure, colored wax is gently rubbed over the material sitting on top of the carved surface to transfer the impression. Some have used pencil lead or chalk/charcoal but both rub-off the material easily. (Test on a non-tombstone surface to ensure there is no bleed-through that damages the stone. If you plan to use fixative spray, do not spray the paper/material while on or near the tombstones. The spray overcast will be carried by the wind onto other tombstones and damage them.) Wax, be it a cake of tombstone wax or a child’s thick width crayon, is more durable. With this method you need to use a gentle touch and be sure not to leave any marks on the stone. Again, test on a non-tombstone surface to ensure the wax does not bleed through the paper/material you have chosen. Depending on the material used, this method is more easily preserved.

Muslin is a bit thin but can be used.
Interfacing, not too thin or thick, works great.



















Parting Thoughts

I made the mistake of leaving home without the Pellon interfacing. I thought I would not have a problem finding some at one of those large grocery/home store. I forgot how far north I was traveling and the best I could find was muslin material. For me it was a little thin to use but it worked pretty well in a pinch. When we changed locations I was able to find a craft store and get some Pellon interfacing which I feel works really well. I don't get the thinnest nor the thickest version but at the moment I can't remember what weight I used.

Note: With regards to the tombstone for Seneca Rider, we have visited this tombstone several times since the mid-1990s. The crack has been worse and has been better. I have photographs of it when you could still piece together/make out, "Age 91 years." Between my photographs and now the rubbing, this stone will be preserved in one way or another.

©2014, goneresearching. All text and photos in this post are copyrighted & owned by me (goneresearching) unless indicated otherwise. No republication (commercial or non-commercial) without prior permission. You may share (tell others) of this blog as long as you give credit and link to this site (not by downloading or copying any post). Thank you.


Monday, September 8, 2014

Is it Done Yet? Our Experience with DNA Testing at Ancestry.com and FamilyTree DNA

As noted in an earlier post, Ancestry.com's retirement of its Y-DNA and mtDNA testing at the beginning of June 2014 prompted us to get off our butts and actually perform and mail in the various DNA tests we had purchased that were still valid. (We had one Y-DNA and one mtDNA test from Ancestry.com that had not been performed/processed at the time of the retirement announcement and these were refunded to us.)

At that time, I thought I would keep track of the tests' progress and give a run-down of what we experienced between the two companies involved -- Ancestry.com and FamilyTree DNA -- since we performed and mailed in the tests at the same time. I delayed making this post a bit longer to include our experience with an autosomal transfer order.

So what tests did we do?
We had two AncestryDNA (autosomal) tests purchased prior to the Ancestry.com retirement announcement. (Note: AncestryDNA, the autosomal test, was not retired by Ancestry.com just the Y-DNA and mtDNA tests.) One test was purchased in 2013 and the other in 2014. I also had an mtDNA test purchased in March 2014 with an FamilyFinder (autosomal) upgrade purchased in June 2014. All of these tests were purchased on sale.

At the end of this August, I ordered one Autosomal Transfer from FamilyTree DNA. This allowed me to upload the raw DNA data from another company's compatible test (AncestryDNA in this case) to a FamilyTree DNA FamilyFinder test. Shockingly, I purchased this transfer at regular price and not at a sale price.

So from the time of purchase to the time of results this is what we experienced.



Test
AncestryDNA (autosomal) the newer kit - Me 
Spit Tube with pre-paid box for return to Utah
AncestryDNA (autosomal) the older kit - Sister
Spit Tube with pre-paid padded envelope for return to Utah
FamilyTreeDNA (mtDNA and Autosomal Upgrade) - Mom
Swabs with padded envelope for return (not pre-paid) to Texas
Autosomal Transfer
from AncestryDNA to FamilyTreeDNA Family Finder - Sister
No physical test, just uploaded raw data that I downloaded from AncestryDNA
Purchased Test
April 27, 2014
Jan 6, 2013
Tues., April 1, 2014
Fri., August 29, 2014*
Shipped
April 30, 2014
(3 days after order)
Jan 11, 2013
(5 days after order)
Wed., April 2, 2014
(1 day after order)
n/a
Purchased Upgrade (no test kit sent/uses swabs from first test)
n/a
n/a
Tues., June 17, 2014
n/a
Took Test
Tues., June 24, 2014
Tues., June 24, 2014
Tues., June 24, 2014
n/a
Activated Test Online
Wed., June 25, 2014
Wed., June 25, 2014
n/a
n/a
Postal Mailed Test
Wed., June 25, 2014
Wed., June 25, 2014
Wed., June 25, 2014 
Fri., August 29, 2014
(technically, I uploaded the data it was not postal mailed)
Received Test / Email Confirmation of Receipt
Thurs., July 3, 2014
(I saw by signing in)
Email: Thurs., July 3, 2014 3:30 p.m.
Expect results in 6-8 weeks
[est. Aug 14 – Aug 28]




 
(0 day – start counting
or 8 days from mailing)
Thurs., July 10, 2014

Email: Thurs., July 10, 2014 5:40 p.m.
Expect results in 6-8 weeks
[est. Aug 21 – Sep 4]

[Note: email received after I sent email at 4:36 p.m. regarding “missing test”]
(0 day – start counting
or 15 days from mailing)
Thurs., July 3, 2014
(I saw by signing in)
Email: Thurs., July 3, 2014 9 p.m.









(0 day – start counting
or 8 days from mailing)
No email received other than confirmation of sale email which had no directions on how to proceed next. 

Note: From a prior phone call to customer service in regards to a couple things, I learned that autosomal transfers results generally take 3-4 business days
Received by Lab
n/a
n/a
Wed., July 9, 2014
(6 days from test received
or 14 days from mailing)
Fri., August 29, 2014
Batch Assigned
n/a
n/a
Thurs., July 10, 2014

Family Finder 3-4 weeks
[est. July 31 – Aug 7]

mtDNA full seq.
(HVR1, HVR2, and mtDNA coding region) 6-8 weeks
[est. Aug 21 – Sep 4]

(0 day – start counting
or 7 days from test received
or 15 days from mailing)
n/a
Processing Test
Thurs., July 3, 2014 ?begun
Thurs., July 10, 2014 ?begun
Thurs., July 10, 2014

Mon., Sept. 1, 2014 (noticed 1:25 am) (technically said Sent)

(0 day – start counting
or 3 days from uploading)
Results Arrived
Fri., July 18, 2014 found results on My DNA Page at 10:38 p.m. (email found later was sent at 10:21 p.m.)

 






AncestryDNA
(16 days from test received
or 24 days from mailing)
[approx. 2 weeks + 2 days
or approx. 3 weeks + 3 days]
Mon., July 28, 2014 email found later was apparently sent at 5:27 p.m., found email about 6:45 p.m)

 






AncestryDNA
(19 days from test received
or 34 days from mailing)
[approx. 2 weeks + 5 days
or approx. weeks + 6 days]
Thurs., July 31, 2014 FamilyFinder
(found 2:35 p.m. by logging in)
[email arrived 9:11 p.m.]

Mon., Aug. 18, 2014 mtDNA
(found 9:40 p.m. by logging in)
[email arrived 10:44 p.m.]

FamilyFinder
(21 days from batching
or 28 days from receiving)
or 36 days from mailing)
[approx. 3 weeks
or approx. 4 weeks
or approx. 5 weeks + 1 day]

mtDNA
(39 days from batching
or 46 days from receiving)
or 54 days from mailing)
[approx. 5 weeks + 4 days

or approx. 6 weeks + 4 days
or approx. 7 weeks + 5 day]

Fri., Sept. 5, 2014
(noticed around 12 p.m.)
[email arrived 9:12 p.m.]









Autosomal Transfer
to FamilyFinder*
(4 days from “Sent” to process
or 7 days from uploading)

*Obviously, this was started late on the Friday before the holiday weekend so the time from uploading reflects this.



So how long did it take?
As far as the return postal mail time, based on two of the test kits (one from Ancestry.com, one from FamilyTree DNA) there was no difference in mail time. I'm not sure if the delay with the older AncestryDNA test came from the post office's end or from Ancestry.com's end with kit intake. (Ancestry changed its test kit packaging.) I never got an answer from Ancestry.com's DNA customer service with regards to the delay. The results just magically appeared one hour after I sent in the query about the missing test.

As far as the time it took to receive results from when the company received/batched the test, despite the one AncestryDNA test going AWOL for one week both AncestryDNA test results were returned well before the 6 – 8 week estimate. The FamilyFinder test results from FamilyTree DNA also came in on time as did the mtDNA test results. Though both companies start their estimated time “clocks” when a test is received or batched, I have included the timing from mailing because I have a feeling that is how some will perceive the length of their wait for results.

With the autosomal transfer, there likely was a delay due to the time I ordered the transfer (late afternoon on a Friday) and that it was the start of a holiday weekend. Though the data was sent to processing by the wee hours of Monday morning (the holiday.) From that point it was 4 business days so I'm considering this delivered as promised.

Of course if there is a really a good sale and if a lot of those tests are performed and turned in promptly it may take longer than a company’s normal estimated time until results are received.

So what did I find out? 
I'll do a short post about my first look at the results next.

©2014, goneresearching. All text and photos in this post are copyrighted & owned by me (goneresearching) unless indicated otherwise. No republication (commercial or non-commercial) without prior permission. You may share (tell others) of this blog as long as you give credit and link to this site (not by downloading or copying any post). Thank you.